Dr Mehmet Kartal
Reader
- About
-
- Email Address
- mehmet.kartal@abdn.ac.uk
- Telephone Number
- +44 (0)1224 272495
- Office Address
School of Engineering, University of Aberdeen, Fraser Noble Building (room 252), King’s College Aberdeen, AB24 3UE, United Kingdom
- School/Department
- School of Engineering
Biography
Work Experience
Reader in Mechanical Engineering, University of Aberdeen, 08/2020 - Present
Senior Lecturer in Mechanical Engineering, University of Aberdeen, 08/2016 - 07/2020
Lecturer in Mechanical Engineering, University of Aberdeen, 09/2014 - 07/2016
Post-doctoral Research Assistant, University of Oxford, 01/2008 - 08/2014
Memberships and Affiliations
- Internal Memberships
-
Director of Post-Graduate Research Students (2022-present)
Programme Coordinator for the MSc in Advanced Mechanical Engineering (2017 -2023)
Programme Coordinator for the MSc in Advanced Structural Engineering (2021 -2023)
Coordinator of Non-Destructive Testing Services (μCT) (2016 - present)
- External Memberships
-
A panel member of the Royal Society’s Committee (2016-Present)
A Fellow of the Institute of Mechanical Engineers (2020-Present)
Act as External Examiner for PhD viva (2016-Present)
A reviewer for
- Additive Manufacturing
- Experimental Mechanics
- International Journal of Fatigue
- Wear
- Materials & Design
- Composites Part A
- Engineering Fracture Mechanics
- International Journal of Solids and Structures
- International Journal of Mechanical Sciences
- The Journal of Strain Analysis for Engineering Design
- Tribology International
- ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik
- The Journal of Engineering
- Strojniški vestnik – Journal of Mechanical Engineering
- International Journal of Pressure Vessels and Piping
- Research
-
Research Overview
Micromechanical modelling
Contact mechanics
Residual stresses and eigenstrain theory
Experimental mechanics
Mechanics of materials
Funding and Grants
External Grants Awarded
- M.E. Kartal. 3D in-situ based methodology for optimizing the mechanical performance of selective laser melted aluminium alloys. EPSRC, £101k, 2018-2021
- M.E. Kartal, A. Karadimos and R.D. Neilson. Designing new Umbelicals for deep sea applications (Phase 2). Oil and Gas Innovation Centre (Phase 2), £260, 2018-2020
- M.E.Kartal, A. Karadimos and R.D. Neilson. Designing new Umbelicals for deep sea applications (Phase 1). Oil and Gas Innovation Centre, £68k, 2017-2018
- M.E. Kartal. Multiscale Experimental and Computational Techniques for Optimizing Selective Laser Melting Additive Manufacturing Process Parameters. NSIRC/TWI PhD Sponsorship 2016, £44k, 2016-2019
- M.E. Kartal., I. Guz and M. Kashtalyan. KTP between University of Aberdeen and Westerton. Department of Trade and Industry (Knowledge Transfer Partnership), £150k, 2016-2017.
- M.E. Kartal. Three-dimensional in-situ measurements of deformation using the x-ray microscope and microtest stage. The Royal Society Research Grant, £15k, 2015-2016.
- A.C.F. Cocks and M.E. Kartal. Measurements of residual stresses in ultra-thick steel welds and analysis of relationship between residual stresses and fatigue fracture. Welding and Joining Research Group Technical Research Laboratories POSCO, $50k, 2011-2013.
- Teaching
-
Teaching Responsibilities
EM3028:Engineering Materials
EG4529/EM4529 Nonlinear Mechanics
EG5096 Fatigue and Fracture Mechanics
EG50T7 Subsea Construction, Inspection and Maintenance
EG5565 MEng Group Design
EG4013 MEng/BEng Individual Projects in Mechanical Engineering
- Publications
-
Page 3 of 3 Results 51 to 74 of 74
Analytical solutions for determining residual stresses in two-dimensional domains using the contour method
Proceedings of the Royal Society A: Mathematical, Physical, and Engineering Sciences, vol. 469, no. 2159, 20130367Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1098/rspa.2013.0367
A comparison of contact stiffness measurements obtained by the digital image correlation and ultrasound techniques
Experimental Mechanics, vol. 53, no. 7, pp. 1245-1263Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s11340-013-9718-5
Characterisation of crack tip fields under non-uniform fatigue loading
Frattura ed Integrità Strutturale, vol. 25, no. 7, pp. 1-6Contributions to Journals: ArticlesDigital image correlation measurement of near-tip fatigue crack displacement fields: constant amplitude loading and load history effects
Fatigue & Fracture of Engineering Materials & Structures, vol. 36, no. 1, pp. 3-13Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1111/j.1460-2695.2012.01707.x
Determination of the complete microscale residual stress tensor at a subsurface carbide particle in a single-crystal superalloy from free-surface EBSD
Acta Materialia, vol. 60, no. 13-14, pp. 5300-5310Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.actamat.2012.06.027
Micromechanical studies of deformation, lattice rotation, stress and crack nucleation in single and polycrystal materials
Iutam Symposium Advanced Materials Modelling for StructuresContributions to Conferences: AbstractsAn elastic–plastic asperity interaction model for sliding friction
Tribology International, vol. 44, no. 12, pp. 1679-1694Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.triboint.2011.06.018
Investigation of the friction variation with sliding which is commonly observed in individual fretting test cycles
Applied Mechanics and Materials, vol. 70, pp. 213-218Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.4028/www.scientific.net/AMM.70.213
Measurement of tangential contact stiffness in frictional contacts: the effect of normal pressure
Applied Mechanics and Materials, vol. 70, pp. 321-326Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.4028/www.scientific.net/AMM.70.321
Measurements of pressure and area dependent tangential contact stiffness between rough surfaces using digital image correlation
Tribology International, vol. 44, no. 10, pp. 1188-1198Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.triboint.2011.05.025
Investigation of non-Coulomb friction behaviour in reciprocating sliding
Wear, vol. 271, no. 5, pp. 802-816Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.wear.2011.03.014
An asperity interation model for friction
Third European Conference on Tribology (ECOTRIB), pp. 331-333Contributions to Conferences: AbstractsMeasurement and modelling of near-tip displacement fields for fatigue cracks in 6082 T6 aluminium
Proceedings of First I.J. Fatigue & FFEMS Joint Workshop, Fomi di Sopra, Italy, March 7-9, 2011. James, M. N., Yates, J. R., Susmel, L., Iacoviello, F. (eds.). Italian Group of Fracture, pp. 42-49, 8 pagesChapters in Books, Reports and Conference Proceedings: ChaptersDetermination of the frictional properties of titanium and nickel alloys using the digital image correlation method
Experimental Mechanics, vol. 51, no. 3, pp. 359-371Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1007/s11340-010-9366-y
Partial slip problem for two semi-infinite strips in contact
International Journal of Engineering Science, vol. 49, no. 2, pp. 203-211Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijengsci.2010.11.007
A simple model for the prediction of tangential contact stiffness in frictional contact
Proceedings of the Fourth European Conference on Computational MechanicsContributions to Conferences: AbstractsTorsional contact between elastically similar flat-ended cylinders
International Journal of Solids and Structures, vol. 47, no. 10, pp. 1375-1380Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijsolstr.2010.01.021
Determination of the profile of the complete residual stress tensor in a VPPA weld using the multi-axial contour method
Acta Materialia, vol. 56, no. 16, pp. 4417-4428Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.actamat.2008.05.007
Determination of weld metal mechanical properties utilising novel tensile testing methods
Applied Mechanics and Materials, vol. 7-8, pp. 127-132Contributions to Journals: ArticlesUse of micro tensile test samples in determining the remnant life of pressure vessel steels
Applied Mechanics and Materials, vol. 7-8, pp. 187-194Contributions to Journals: ArticlesResidual stress measurements in single and multi-pass groove weld specimens using neutron diffraction and the contour method
Materials Science Forum, vol. 524-525, pp. 671-676Contributions to Journals: ArticlesStress distributions in cooling fins of variable thickness with and without rotation
Journal of Thermal Stresses, vol. 28, no. 8, pp. 861-883Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1080/01495730590964864
Isi Yükü Ve Merkezkaç Kuvvet Etki̇si̇ Altindaki̇ Deği̇şken Kalinlikli Uzantili Yüzeylerde Deformasyon Anali̇zi̇
Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 20, no. 3, pp. 379-385Contributions to Journals: ArticlesA nonlinear shooting method applied to solid mechanics: Part 1. Numerical solution of a plane stress model
International Journal of Nonlinear Analysis and Phenomena, vol. 1, pp. 27-40Contributions to Journals: Articles
