Engineering (Civil and Structural), BEng

Engineering (Civil and Structural), BEng

Introduction

Structural Engineering is generally recognised as a specialist area of Civil Engineering but the two areas are very similar. This is a perfect degree programme for those looking to succeed in this field as it offers up our hugely successful standard Civil Engineering degree but introduces a number of key areas of specialism.

Ranked 12th UK, 1st in Scotland for General Engineering (Complete University Guide 2024)

Study Information

At a Glance

Learning Mode
On Campus Learning
Degree Qualification
BEng
Duration
48 months
Study Mode
Full Time
Start Month
September
UCAS Code
H221
Pathway Programme Available
Undergraduate Foundation Programme

This Honours degree programme follows a similar structure to the straight BEng Civil Engineering degree. The major difference is the compulsory study of the Advanced Structural Analysis in year 4.

What You'll Study

The first two years cover general Engineering, with elements of Chemical, Mechanical, Petroleum and Electrical/Electronics, as well as Civil. In the later years you specialise, following your chosen discipline in greater depth. You do not need to finalise your choice of specialisation until you begin third year.

It is possible to move between MEng and BEng and this can be accomplished at any point until the second half session of fourth year. Successful BEng candidates will be offered the chance to change to the MEng and there is no quota, meaning that if grade requirements are met that transfer is guaranteed.

Year 1

Compulsory Courses

Principles of Electronics (EG1008)

15 Credit Points

The aim of the course is to introduce basic concepts of electrical & electronics within a context of general engineering. The topics covered are kept at an elementary level with the aim of providing the foundational material for subsequent courses at levels 1 and 2. The course adopts the philosophy of application oriented teaching. During each topic the students will be provided with examples of day-to-day devices. Topics covered include dc circuit analysis, electronic amplifiers, digital circuits, optoelectronics, and ac theory.

Engineering Mathematics 1 (EG1504)

15 Credit Points

The course presents fundamental mathematical ideas useful in the study of Engineering. A major focus of the course is on differential and integral calculus. Applications to Engineering problems involving rates of change and averaging processes are emphasized. Complex numbers are introduced and developed. The course provides the necessary mathematical background for other engineering courses in level 2.

CAD and Communication in Engineering Practice (EG1010)

15 Credit Points

The course is designed to introduce the students to different methods of communication in the process of interchanging ideas and information. Oral presentation and writing of technical reports are introduced. The importing data from web-based and library-based sources will be integrated through information retrieval and investigative skills training. Professional ethics are covered on plagiarism, copyright and intellectual property. Engineering drawing skills and knowledge of relevant British and International Standards will be developed through intensive training in the use of computer aided design and modelling package, SolidWorks. Standard drawing formats including 3D depiction of stand alone parts and assemblies are covered.

Fundamental Engineering Mechanics (EG1510)

15 Credit Points

Engineering Mechanics is concerned with the state of rest or motion of objects subject to the action of forces. The topic is divided into two parts: STATICS which considers the equilibrium of objects which are either at rest or move at a constant velocity, and DYNAMICS which deals with the motion and associated forces of accelerating bodies. The former is particularly applied to beams and truss structures. The latter includes a range of applications, such as car suspension systems, motion of a racing car, missiles, vibration isolation systems, and so on.

Fundamentals of Engineering Materials (EG1012)

15 Credit Points

Engineering design depends on materials being shaped, finished and joined together. Design requirements define the performance required of the materials. What do engineers need to know about materials to choose and use them successfully? They need a perspective of the world of materials. They need understanding of material properties. They need methods and tools to select the right material for the job. This course will help you develop knowledge and skills required for the successful selection and use of engineering materials.

Getting Started at the University of Aberdeen (PD1002)

This course, which is prescribed for level 1 undergraduate students (and articulating students who are in their first year at the University), is studied entirely online, takes approximately 5-6 hours to complete and can be taken in one sitting, or spread across a number of weeks.

Topics include orientation overview, equality and diversity, health, safety and cyber security and how to make the most of your time at university in relation to careers and employability.

Successful completion of this course will be recorded on your Enhanced Transcript as ‘Achieved’.

Optional Courses

Plus 15 credit points from courses of choice at Levels 1 or 2 in first half session.

Plus 30 credit points from courses of choice at Levels 1 or 2 in second half session.

Year 2

Compulsory Courses

Fluid Mechanics and Thermodynamics (EG2004)

15 Credit Points

The fluid mechanics section of the course begins with the material properties of fluids. This is followed by studying fluid statics and principles of fluid motion. Bernoulli’s equation is used to explain the relationship between pressure and velocity. The final fluids section introduces the students to incompressible flow in pipelines.

The thermodynamics section presents: the gas laws, including Van Der Waals’ equation; the first law of thermodynamics with work done, heat supply, and the definitions of internal energy and enthalpy. The second law is introduced including entropy through the Carnot cycle.

Engineering Mathematics 2 (EG2012)

15 Credit Points

This course follows Engineering Mathematics 1 in introducing all the mathematical objects and techniques needed by engineers. It has three parts:

  • Matrices: definitions, operations, inverse and determinant; application to systems of linear equations.
  • Ordinary differential equations: 1st order (linear and separable), 2nd order with constant coefficients, forced oscillations and resonance.
  • Functions of two variables: partial derivatives and extrema, the chain rule, the heat equation and the wave equation.
Process Engineering (EG2011)

15 Credit Points

A general engineering course that provides insight into the two main conservation principles, mass and energy. Processes are usually described through block diagrams. This language, common to many disciplines in engineering, helps the engineer to look at their processes with an analytical view. Degree of freedom analysis is addressed, emphasising its importance to solve a set of linear equations that model fundamental balances of mass. Practical examples of Energy balances are displayed, bringing Thermodynamics to a practical level. Heat Transfer is introduced. Process control is introduced, explaining basic control techniques and concepts, i.e sensors, feedback, control loops and PID controllers.

Design and Computing in Engineering Practice (EG2501)

15 Credit Points

A general engineering course that provides an insight into the principles of engineering design process, computer programming in MATLAB and its application in parametric study and basic design optimisation, environmental ethics and sustainability in the context of design, and Computer Aided Design (CAD) using Solidworks. The course also includes hands-on exercises on the manufacture of simple parts using a variety of machine tools and joining processes.

Solids and Structures (EA2502)

15 Credit Points

This course provides students with the opportunity to refresh and extend their knowledge to analyse the mechanical behaviour of engineering materials and structures. In particular, mechanical properties of materials, and 2D and 3D stresses and strains are examined, the effects of internal imperfections on the performance of materials under loading, brittle fracture, fatigue and non-destructive testing are discussed. The structural analysis of beams and columns, deflection and buckling, as well as design applications are also considered in the course.

Electrical and Mechanical Systems (EG2503)

15 Credit Points

This course provides students with an integrated development of methods for modelling, analysing and designing systems comprising electrical and mechanical components. In doing so it intends to emphasise to the students the similarity in behaviour between electrical and mechanical systems. The course aims to give an introduction to both electrical machines, circuit and systems, transformers, and similar mechanical systems like gearbox, vibrating system and principles of dynamics, and thus provide the foundation material for several courses at level 3 .

Optional Courses

Select a further 30 credit points from courses of choice.

Year 3

Compulsory Courses

Geotechnics 1 (EA3027)

15 Credit Points

This course is aimed principally at students interested in civil engineering and its focus is to familiarise students with the fundamental concepts involved in soil mechanics and engineering geology. The first course in the civil engineering programme includes the importance of soil mechanics in structural design. The main emphasis is on understanding the main principles of soil mechanics through the introduction of laboratory tests commonly used to obtain the engineering properties of different types of soil such as sand and clay. Discussion of the consequences of some soil failures (such as in the case of the Tower of Pisa) is also introduced.

Stress Analysis A (EM3015)

15 Credit Points

One of the roles of an engineer is to ensure that engineering components perform in service as intended and do not fracture or break into pieces. However, we know that sometimes engineering components do fail in service. Course examines how we determine the magnitude of stresses and level of deformation in engineering components and how these are used to appropriately select the material and dimensions for such component in order to avoid failure. Focus is on using stress analysis to design against failure, and therefore enable students to acquire some of the fundamental knowledge and skills required for engineering design.

Engineering Analysis and Methods 1a (EG3007)

15 Credit Points

Modern engineering analysis relies on a wide range of analytical mathematical methods and computational techniques in order to solve a wide range of problems. The aim of this course is to equip students with the necessary skills to quantitatively investigate engineering problems. Examples applying the methods taught to practical situations from across the full range of engineering disciplines will feature heavily in the course.

Fluid Mechanics (EM3019)

15 Credit Points

The course begins with dimensional analysis and the concept of dynamic similarity applied to fluid flow phenomena. This is followed by sections on the energy and momentum equations applied to a range of problems in civil, mechanical, chemical and petroleum engineering, including steady flow in pipes, design of pump-pipeline systems, cavitation, forces on bends, nozzles and solid bodies, turbomachinery and propeller theory. A section on unsteady flow applies inertia and water hammer theory to the calculation of pressure surge in pipes. The final section deals with flow through porous media such as flow through soils and rocks.

Mechanics of Structures (EA3518)

15 Credit Points

The major topic of this course is an introduction to modern methods of elastic structural analysis. In this topic, direct, energy and matrix methods are jointly used to solve, initially, problems of the deformation of simple beams. The theorem of virtual work is introduced in the context of beams and frameworks.

The rigid-plastic analysis of beams is then introduced along with the upper bound theorem and their importance to engineering design.

Design of Structural Elements (EA3519)

15 Credit Points

This course is an introduction to Structural Design using steel, concrete and composite steel/concrete.

The emphasis is on the design of individual components – the ‘Structural Elements’ – these being members in tension, compression, bending – in either steel or reinforced concrete – and in the bolted and welded connections between steel members.

There is an extensive laboratory exercise testing reinforced and un-reinforced concrete to destruction.

It should be noted that students are also required to do the separate course EA3720, half of which consists of a 9 week Steel Design exercise.

Structural Dynamics (EA3538)

10 Credit Points

This course introduces the theory of dynamics and the vibration of single and multi-degree of freedom systems.

Civil Engineering Design and Surveying (EA3720)

10 Credit Points

This course consists of two quite separate halves. The first is a 9 week Civil Engineering Design activity, which runs concurrently with the associated course EG3519 (Design of Structural Elements). Generally there will be two half days of timetabled sessions in each of those 9 weeks. The second half of the course is a one-week residential Field Surveying and Hydrology field trip, which usually takes place in the first week of the Easter break. There will be a charge to students to cover the specific transport, food and accommodation costs associated with that field trip.

Project and Safety Management (EG3599)

10 Credit Points

To course aims to provide students with an awareness of purpose, principals, fundamental concepts and strategies of safety and project management.

Year 4

Compulsory Courses

Geotechnics 2 (EA40JE)

10 Credit Points

It aims to equip students with the main concepts of foundation design where the concepts of pile foundations, retaining walls and slope stability are explored. The course gives a student adequate tools to understand the design approaches associated with different types of soil. Geotechnical standard code, Eurocode 7 is introduced and discussed. In addition principles of ground water flow and the main problems related to its sustainable management are discussed. This course aims for a student to reach an adequate level in soil mechanics and foundation engineering as the basis for the training of a professional civil or structural engineer.

Civil Engineering Hydraulics (EA40JF)

10 Credit Points

The course develops topics in hydraulics of interest to civil engineers. It demonstrates the link between well-developed theoretical studies and their practical application in river, environmental, offshore and coastal engineering. The course begins with water wave theory with particular application to coastal and offshore engineering. This is followed by consideration of boundary layer development over a flat plate and curved surfaces, leading to boundary layer separation and forces on immersed bodies. These topics are also part of the EM40JJ Fluid Dynamics course. The second part of the course is mainly concerned with the analysis of open channel and river flows and sediment transport. The mechanics of open channel flow are first addressed, mainly focussed on steady, rapidly and gradually varied flow problems applied to artificial and natural channels. This is followed by consideration of fundamental aspects of sediment transport, including threshold criteria and the calculation of bed load and suspended load transport.

Advanced Structural Design (EA40JG)

10 Credit Points

This course is a follow-on course to the Level 3 Course on Design of Structural Elements (EA3519) (and to some extent the Level 3 Civil Engineering Design (EA3720)). It covers four main areas:

a) Design of Industrial Buildings in Structural Steelwork

b) Design of steel-framed multi-storey buildings

c) Design of domestic buildings using masonry and timber

d) Design of pre-stressed concrete

Advanced Structural Analysis (EA4026)

15 Credit Points

Course extends the basic stiffness method of analysis developed in the pre-requisite courses. Fundamental principles of the stiffness method of analysis, with automatic assembly of the stiffness matrix for rigid jointed plane frames and space structures, are presented in some detail. Elastic instability of frames, and the design of continuous steel beams and portal frames using plastic methods will be undertaken. Analysis of flat plates and slabs using yield line theory, and an introduction to shells also covered. The course concludes with a brief outline of the finite element method of analysis, with computer-based applications forming an important practical component.

Group Design Project (BEng) (EG4578)

15 Credit Points

This course is a concentrated design and reporting exercise which requires application of project management and team liaison skills in addition to technical design ability. Specific exercises will include interdisciplinary aspects and will relate to design requirements arising from the professional activities of the School of Engineering or its industrial contacts. Written and oral presentations form part of the course.

Optional Courses

Select one of the following two dissertation options:

  • BEng Individual Project (EG4014)
  • Group Design Project (BEng) (EG4578)
  • Plus 30 credit points from courses of choice at Levels 3 and 4

OR

  • Individual Project Abroad (BEng) (EG45PA)
  • Group Design Project (BEng) (EG4578)
  • Plus 15 credit points from courses of choice at Levels 3 and 4
BEng Individual Project (EG4014)

30 Credit Points

To provide the student with the opportunity of pursuing a substantial and realistic exercise in the practice of engineering at or near a professional level, and to further enhance the student's critical and communication skills. The project will usually be carried out at the University of Aberdeen but may be carried out at industry or other research location.

Individual Project Abroad (BEng) (EG45PA)

45 Credit Points

The course is designed to provide students with the opportunity to carry out a project in an approved European institution by pursuing a substantial and realistic exercise in the practice of engineering at or near a professional level, and to further enhance the student's critical and communication skills.

We will endeavour to make all course options available. However, these may be subject to change - see our Student Terms and Conditions page.

How You'll Study

Learning Methods

  • Lab Work
  • Lectures
  • Tutorials
  • Workshops

Assessment Methods

Students are assessed by any combination of three assessment methods:

  • coursework such as essays and reports completed throughout the course;
  • practical assessments of the skills and competencies learnt on the course; and
  • written examinations at the end of each course.

The exact mix of these methods differs between subject areas, year of study and individual courses.

Honours projects are typically assessed on the basis of a written dissertation.

Why Study Engineering (Civil and Structural)?

Why Civil Engineering

  • Civil engineering at Aberdeen focuses on making lasting, positive improvements to society through the use of novel techniques and materials to design and build sustainable infrastructure.
  • Our teaching is supported by our excellent workshop and laboratories, with state-of-the-art equipment, including some of Scotland’s very best hydraulic equipment.
  • The University of Aberdeen Engineering Society is a student-run group for both professional and social events. They welcome students from all disciplines and have a wide range of activities to suit your interests.
  • Our interdisciplinary approach means students gain experience in each engineering discipline, making them highly sought-after by employers. This flexibility also means you choose your specialisation once you have experienced all five disciplines.
  • The School of Engineering has strong links with industry, including local, national and international organisations, who support our teaching through guest lectures and seminars, placement opportunities, site visits and scholarships.

Entry Requirements

Qualifications

The information below is provided as a guide only and does not guarantee entry to the University of Aberdeen.


General Entry Requirements

2024 Entry

SQA Highers

Standard: ABBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.

Minimum: BBB (Good performance required in Mathematics and Physics*)
Applicants who achieve our Minimum entry requirements over S4 and S5 are encouraged to apply and will be considered. Good performance in additional Highers / Advanced Highers maybe required in order to receive an offer of admission.

Adjusted: BB (Good performance required in Mathematics*)
Applicants who meet one or more of our widening access criteria and who achieve good performance in Maths and one other subject are guaranteed a conditional offer. Good performance in additional Highers / Advanced Highers will be required.

* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.

More information on our definition of Standard, Minimum and Adjusted entry qualifications.

A LEVELS

Standard: BBB (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.

Minimum: BBC (Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry). Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.

Adjusted: BB (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.

More information on our definition of Standard, Minimum and Adjusted entry qualifications.

International Baccalaureat

Minimum of 32 points including Mathematics and Physics at HL (6 or above).

Irish Leaving Certificate

Five subjects at Higher, with 3 at H2 and 2 at H3. H2 or above in Mathematics and H3 or above in Physics required.

FOR CHEMICAL & PETROLEUM ENGINEERING

Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.

2025 Entry

SQA Highers

Standard: BBBB (Mathematics and Physics or Engineering Science required*)
Applicants who achieve the Standard entry requirements over S4 and S5 will be made either an unconditional or conditional offer of admission.

Minimum: BBC (Good performance required in Mathematics and Physics*)
Applicants who have achieved BBC at Higher and meet one of the widening participation criteria above are encouraged to apply and are guaranteed an unconditional offer for MA, BSc and BEng degrees. 

Adjusted: BB (Good performance required in Mathematics*)
Applicants who have achieved BB at Higher, and who meet one of the widening participation criteria above are encouraged to apply and are guaranteed an adjusted conditional offer for MA, BSc and BEng degrees.

We would expect to issue a conditional offer asking for one additional C grade at Higher. 

* These subjects can be either held at the time of application or be achieved during the appropriate admissions cycle.

Foundation Apprenticeship: One FA is equivalent to a Higher at A. It cannot replace any required subjects.

More information on our definition of Standard, Minimum and Adjusted entry qualifications.

A LEVELS

Standard: BBC*. Applicants who are predicted to achieve the Standard entry requirements are encouraged to apply and may be made an offer of admission.

Minimum: BCC* Applicants who are predicted to achieve the Minimum entry requirements are encouraged to apply and will be considered.

  • *NOTE: Good performance required in Mathematics, plus at least one from Physics, Design & Technology, Engineering or Chemistry.

Adjusted: CCC (Good performance required in Mathematics)
Applicants who meet one or more Widening Participation criteria and who are predicted to achieve a good performance in Mathematics and one other subject may be made an Adjusted offer of entry.

More information on our definition of Standard, Minimum and Adjusted entry qualifications.

International Baccalaureat

Minimum of 32 points including Mathematics and Physics at HL (6 or above).

Irish Leaving Certificate

Five subjects at Higher, with 3 at H2 and 2 at H3. H2 or above in Mathematics and H3 or above in Physics required.

FOR CHEMICAL & PETROLEUM ENGINEERING

Please note: for entry to Chemical and Petroleum Engineering an SQA Higher or GCE A Level or equivalent qualification in Chemistry is required for entry to year 1, in addition to the general Engineering requirements.

The information displayed in this section shows a shortened summary of our entry requirements. For more information, or for full entry requirements for Engineering degrees, see our detailed entry requirements section.


English Language Requirements

To study for an Undergraduate degree at the University of Aberdeen it is essential that you can speak, understand, read, and write English fluently. The minimum requirements for this degree are as follows:

IELTS Academic:

OVERALL - 6.0 with: Listening - 5.5; Reading - 5.5; Speaking - 5.5; Writing - 6.0

TOEFL iBT:

OVERALL - 78 with: Listening - 17; Reading - 18; Speaking - 20; Writing - 21

PTE Academic:

OVERALL - 59 with: Listening - 59; Reading - 59; Speaking - 59; Writing - 59

Cambridge English B2 First, C1 Advanced or C2 Proficiency:

OVERALL - 169 with: Listening - 162; Reading - 162; Speaking - 162; Writing - 169

Read more about specific English Language requirements here.

International Applicants who do not meet the Entry Requirements

The University of Aberdeen International Study Centre offers preparation programmes for international students who do not meet the direct entry requirements for undergraduate study. Discover your foundation pathway here.

Fees and Funding

You will be classified as one of the fee categories below.

Fee information
Fee category Cost
RUK £9,250
Tuition Fees for 2024/25 Academic Year
EU / International students £24,800
Tuition Fees for 2024/25 Academic Year
Home Students £1,820
Tuition Fees for 2024/25 Academic Year

Scholarships and Funding

Students from England, Wales and Northern Ireland, who pay tuition fees may be eligible for specific scholarships allowing them to receive additional funding. These are designed to provide assistance to help students support themselves during their time at Aberdeen.

Additional Fees

  • In exceptional circumstances there may be additional fees associated with specialist courses, for example field trips. Any additional fees for a course can be found in our Catalogue of Courses.
  • For more information about tuition fees for this programme, including payment plans and our refund policy, please visit our Tuition Fees page.

Our Funding Database

View all funding options in our Funding Database.

Careers

Civil engineering graduates are sought after in a wide variety of industries and business sectors. Civil engineering graduates work in civil and structural companies, working on site, in design offices, project management, buildings and environmental engineering. Civil engineers function very well in both onshore civil engineering sectors as well as the offshore renewable and oil and gas energy sectors.

Recent graduate job roles have included:

  • Graduate Civil and Structural Engineer
  • Graduate Design Coordinator
  • Structural Engineer
  • Bridge Engineer
  • Site Engineer
  • Graduate Transport Engineer

Recent graduates work at companies such as:

  • Arch Henderson
  • Atkins
  • Fairhurst
  • Jacobs
  • Mott MacDonald
  • Network Rail
  • Skanska
  • Petrofac
  • Kier Group
  • VolkerStevin
  • Petrofac

Accreditation

Our Civil Engineering degrees are accredited by the Engineering Council, Institution of Structural Engineers, Institution of Civil Engineers, Institute of Highways Engineers and the Chartered Institution of Highways and Transportation and are your first step towards achieving Chartered Engineer status.

This degree holds accreditation from

Engineering Work Experience

The Engineering Work Experience course develops students’ work readiness. Hear what our students and partner organisations have to say about their experience.

Focus on employability

Image for useful fact about this Degree

100 Years of Engineering

The School of Engineering is celebrating 100 years of engineering at the University of Aberdeen in 2023.

Our Experts

Information About Staff Changes

You will be taught by a range of experts including professors, lecturers, teaching fellows and postgraduate tutors. However, these may be subject to change - see our Student Terms and Conditions page.

Features

Image for Institution of Civil Engineers
Institution of Civil Engineers

Institution of Civil Engineers

Joining ICE as a student member helps you to build your future in civil engineering. It's FREE and you get lots of great benefits like career advice, resources to help you learn about the industry, and the chance to meet other civil engineers.

Find out more
Image for TAU Formula Racing
TAU Formula Racing

TAU Formula Racing

TAU (Team Aberdeen University) Racing is a student-run Formula Student team that competes annually at Silverstone. It is made up of students from a variety of disciplines and helps develop excellent and highly-relevant career skills.

Image for Student Societies
Student Societies

Student Societies

The University is home to a broad range of student societies including professional teams, extra-curricular and subject-focused organisations and purely recreational groups based on a shared interest.

Find out more

Discover Uni

Discover Uni draws together comparable information in areas students have identified as important in making decisions about what and where to study. You can compare these and other data for different degree programmes in which you are interested.

Get in Touch

Contact Details

Address
Student Recruitment & Admissions
University of Aberdeen
University Office
Regent Walk
Aberdeen
AB24 3FX

Social Media