MEng, PhD, CEng MICE
Personal Chair
- About
-
- Email Address
- a.ivanovic@abdn.ac.uk
- Office Address
- School/Department
- School of Engineering
Biography
- MEng Honours degree, 1st class, in Civil Engineering with major in Geotechnics and Foundations, School of Civil Engineering, Belgrade, Yugoslavia obtained in 1997.
- Ph.D. in Geotechnical Engineering, School of Engineering, University of Aberdeen obtained in 2001.
Memberships and Affiliations
- Internal Memberships
-
-
Director of Internationalisation
-
Course Coordinator for Geotechnics 2 (EA4011), Geotechnics 1 (EA3027), Geotechnics 1A (Harbin) (EG25H9) and Geotechnics 1B (Harbin) (EG35H1)
- Member of the engineering programmes accreditation team 2009-2010 and 2014-15 – responsible for preparation of Civil Engineering programmes
-
- External Memberships
-
- Member, JBM Board (2024 - )
- Member, Institution of Civil Engineers - since 2008 (Graduate member, 2003-2008)
- Chartered Civil Engineer (CEng) - since 2008
- Member, Geotechnical British Association (GBA) - since 2008
- Assessor of Professional Review Report on behalf of the ICE and Interviewer of CEng MICE applicants
- Member, Association of Civil Engineering Departments (ACED) in the UK
- Member of SUT Offshore Site Investigation and Geotechnics Committee (2014 - )
- Member of Scottish Universities Geotechnical Network (SUGN) and a representative of the Aberdeen research group
- External Examiner for Strathclyde and Napier Univerisities
- Regularly reviewing manuscripts for the following journals:
- International journal of Rock Mechanics and Mining Sciences - IJRMMS
- Journal of Geotechnical and Geoenvironmental Engineering (ASCE)
- Ocean Engineering, Elsevier
- Proceedings of ICE: Geotechnical Engineering
- Proceedings of ICE: Engineering and Computational Mechanics
- International Journal of Physical modelling in Geotechnics
- Geomechanics and Geoengineering: An International Journal
- Research
-
Research Overview
My research focuses on the environmental and operational implications of marine and offshore engineering. I examine the impact of trawling gear on benthic ecosystems and explore methods to enhance fuel efficiency in fisheries. I also investigate safe pipeline burial depths in Arctic regions, accounting for geotechnical and climatic constraints.
Recent work includes the decommissioning of subsea pipelines and bundles, and the spatial and regulatory challenges of integrating offshore wind farms with existing fishing activities. My earlier research addressed the dynamic behaviour of ground anchorage systems, with emphasis on numerical and physical modelling techniques.
Current Research
My primary research focuses on the environmental and operational impact of marine infrastructure. I investigate the effects of trawling gear on benthic ecosystems through Finite Element modelling and laboratory experiments, enabling quantitative assessment of seabed disturbance. This work has extended to the oil and gas sector, examining iceberg–seabed interactions under saturated conditions in collaboration with Technip UK.
More recently, I have explored the decommissioning of subsea pipelines, bundles, and offshore wind farms, as well as the spatial and regulatory challenges of coexistence between wind energy developments and traditional fisheries. These projects have received support from the EU, Norwegian Research Council, Fisheries Innovation Scotland, and various industry stakeholders.
Earlier in my career, I focused on the dynamic behaviour of ground anchorage systems, with emphasis on numerical and physical modelling. This included research into mining support systems, addressing industry concerns regarding optimal anchorage length through laboratory testing and computational analysis. That work was supported by EPSRC and industrial partners.
Funding and Grants
Current Projects
09/2016 – 09/2018 : NERC Industrial CASE studentship to examine the biogeochemical effects of benthic trawling (Co-I with Dan J Mayor of National Oceanography Centre, Southampton, as PI) approx. £45k
01/2016-01/2018 : “The development of the engineering application knowledge to deploy the patented 'DeepBuoy' pumpable buoyancy technology” KTP project funded by Innovate UK and Aubin Group, £145,744 (Co-I with Dr Richard Neilson as PI),
01/2015 – 08/2015 : “Modelling of physical impact of demersal fishing gears on the seabed”, Funded by Fisheries Innovation Scotland (FIS) £94,337 (PI).
10/2012 – 06/2016 : “BENTHIS (a Benthic ecosystem fisheries impact study)” EU FP7 grant; PI for 132k Euros, approx. £104k (part of 6M Euro BENTHIS project with 12 other European participants).
Completed Projects
09/2011 – 01/2015 - “Modelling of trawl gear components”; funded by Marine Scotland - Science, Fisheries Research Station, Aberdeen; £22k; (PI)
11/2012 – 12/2015 - “Enhanced Gravity Foundations on Rock for Marine Energy Generators”; joint ETP studentship with Dr Michael Brown (University of Dundee) and Neil Morgan (Lloyds Registrar, Aberdeen);approx. £45k (Co-I)
11/2012 – 06/2013 Technip UK OED - £22k – to support the research on iceberg interaction with the seabed research. (PI)
10/11 – 07/12 Technip UK OED - £6,951 – to support the research on iceberg interaction with the seabed research. (PI)
08/2011 – 01/2012 Royal Academy of Engineering – Industrial Secondment Grant £18k
10/2009 – 10/2012 “Modelling of Large Soil Strain Motions in Pipeline/Seabed Interactions”. NSRI studentship (PI, with Dr R.D. Neilson as Co-I).
01/09 – 01/12 “New fuel and catch efficient active fishing gear concepts based on trawl and seine” EC grant (part of a larger project led by SINTEF Fisheries and Aquaculture (SFH, Trondheim, Norway). PI for £45k. The work is collaborative with Dr FG O’Neill of Marine Scotland - Science, Aberdeen.
05/08 – 05/11 “Investigation of the Design of Anchorage Head and Bond Length for Assessing Multi-strand Anchorages” EPSRC, EP/E050301/1, £267k. (PI, with Dr R.D. Neilson as a Co-I).
10/2007 – 10/2010 “The fundamental understanding of the behaviour of soil nails placed in retaining walls using the centrifuge modelling technique and numerical modelling” NRP scholarship, PI for £30k. (with A Brennan from Dundee University as a Co-I)
03/2008 - 01/2008 “Commercialisation of a system for the assessment of total length of a ground anchorage”. University of Aberdeen, Approx. £34k commercialisation grant entitled: (with R.D. Neilson)
02/2006 – 04/2009 “Development of Fishing Gears with Reduced Effects on the Environment” (part of the 2M Euro DEGREE project with 12 other participants). EC grant PI for a 220k Euros (approx. £145k). Collaborative with Drs Barry O’Neill of the Marine Lab, Fisheries Research Station, Aberdeen and Leonie Robinson of the University of Liverpool. (with Dr RD. Neilson)
11/2003 - 06/2006 “Behaviour of soil nails placed in retaining walls using the centrifuge modelling technique and numerical modelling”, EPSRC (GR/S21335/01). £267k EPSRC grant Co-I with Prof A.A. Rodger as PI, Prof M. C. Davies (University of Dundee), Dr R.D. Neilson and A. J. Starkey as Co-I
02/2003 – 03/2006 “Investigation on the determination of the total bolt length using the current GRANIT system” Amec, £36k (with Prof A.A. Rodger and Dr R.D. Neilson) (MSc student – Mr Ruggero Trevisan)
12/2003 – 07/2004 “Recoding the program for anchorage systems written in Matlab into C++Grant holder of a £18.4k commercialisation grant funded by the University of Aberdeen.
02/2003 – 03/2006 “Fundamental understanding of anchorage behaviour in particular the detection of the free length of prestressed anchorages.” University funded PhD Studentship £36k.
03/2008-01/2009 “Commercialisation of a system for the assessment of total length of a ground anchorage”. University of Aberdeen approx. £34k commercialisation grant . This is a 9 months project with a view of developing a new technology for enhancing the GRANIT system. (with R.D. Neilson)
Consultancies
2011 Kessock Bridge Cable Tension Study, A field study testing the tension at the prestressed cables. Scotland Transerv.
2011 Ice scour laboratory study. Technip, UK
2012 Uplift resistance of pipelines in sand. Technip, UK
2014 CPD ‘OffshoreGeotechnics’ through ASRANet, Shell (May 2014), DOS Subsea (Sept 2014)
- Teaching
-
Teaching Responsibilities
Undergraduate teaching:
- Geotechnics 1 (EA3027)
- Geotechnics 2 (EA4011)
- Geotechnics 1A (EG25H9)
- Geotechnics 1B (EG35H1)
- Individual BEng and MEng projects
Postgraduate teaching:
- Individual MSc projects
- Publications
-
Page 2 of 3 Results 26 to 50 of 72
Analytical and numerical modelling of non-driven disc on friction material
Computers and Geotechnics, vol. 68, pp. 208-219Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compgeo.2015.04.007
Rock-steel interface testing and considerations for gravity foundations for tidal energy generators
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.1201/b18442
- [ONLINE] View publication in Scopus
Towing cylindrical fishing gear components on cohesive soils
Computers and Geotechnics, vol. 65, pp. 212-219Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.compgeo.2014.12.003
An overview of research activities and achievement in geotechnics from the Scottish Universities Geotechnics Network (SUGN)
Chapters in Books, Reports and Conference Proceedings: Conference ProceedingsInterface shear characteristics of Scottish rock samples from sites with tidal energy potential
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.1680/ecsmge.60678.vol3.196
- [ONLINE] View publication in Scopus
Predictions of Ice scour loads and rate effect evaluation from small scale LG tests
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Predictions of ice scour loads from small scale tests under 1 g conditions
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Numerical modelling of bottom trawling ground gear element on the seabed
Ocean Engineering, vol. 91, pp. 316-328Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.oceaneng.2014.08.014
Debonding along the fixed anchor length of a ground anchorage
Engineering Structures, vol. 74, pp. 23-31Contributions to Journals: ArticlesUplift mobilisation resistance of subsea pipelines in loose sand
Géotechnique Letters, vol. 4, no. July - September, pp. 217-222Contributions to Journals: ArticlesNumerical modelling of ice gouge using experimental validation
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Non-destructive testing of rock bolts for estimating total bolt length
International Journal of Rock Mechanics and Mining Sciences, vol. 64, pp. 36-43Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijrmms.2013.08.017
Centrifuge Modeling of the Nondestructive Testing of Soil Anchorages
Journal of Geotechnical and Geoenvironmental Engineering, vol. 139, no. 6, pp. 880-891Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1061/(ASCE)GT.1943-5606.0000788
Friction forces between seabed and fishing gear components
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.1115/OMAE2012-83395
- [ONLINE] View publication in Scopus
Influence of iceberg geometry and scour depth on drag force in sand
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.1115/OMAE2012-84004
- [ONLINE] View publication in Scopus
Influence of iceberg geometry on soil resistance in sand
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Influence of object geometry on penetration into the seabed
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Modelling the physical impact of trawl components on the seabed and comparison with sea trials
Ocean Engineering, vol. 38, no. 7, pp. 925-933Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.oceaneng.2010.09.011
An investigation of the drag induced on a tool in a granular medium
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.1115/OMAE2010-20875
- [ONLINE] View publication in Scopus
Influence of an anchor head on detection of soil anchorage load
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] View publication in Scopus
Influence of a roller clump on the seabed
Chapters in Books, Reports and Conference Proceedings: Conference Proceedings- [ONLINE] DOI: https://doi.org/10.1115/OMAE2009-80145
- [ONLINE] View publication in Scopus
Design of a Robot and Test Procedure for the Dynamic Testing of Anchorages in a Geotechnical Centrifuge
Geotechnical Testing Journal, vol. 32, no. 4, GTJ102055Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1520/GTJ102055
Modelling of debonding along the fixed anchor length
International Journal of Rock Mechanics and Mining Sciences, vol. 46, no. 4, pp. 699-707Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijrmms.2008.09.008
Influence of anchor head on dynamic response of anchorages
Proceedings of the ICE - Engineering and Computational Mechanics, vol. 161, no. 1, pp. 27-34Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1680/eacm.2008.161.1.27
Influence of Geometry and Material Properties on the Axial Vibration of a Rock Bolt
International Journal of Rock Mechanics and Mining Sciences, vol. 45, no. 6, pp. 941-951Contributions to Journals: Articles- [ONLINE] DOI: https://doi.org/10.1016/j.ijrmms.2007.10.003