Dr Alireza Maheri

Dr Alireza Maheri
Dr Alireza Maheri

Dr Alireza Maheri

PhD, CEng, MIMechE

Reader

About

Room 382, Fraser Noble Building

School of Engineering, King’s College

University of Aberdeen

Aberdeen, AB24 3UE

United Kingdom

Biography

Dr Maheri joined University of Aberdeen in 2016. Prior to that, he was a Senior Lecturer at the Department of Mechanical and Construction Engineering, Northumbria University (2009-2016) and a member of Aerospace Vehicle Architecture and Design Integration Research and Teaching Group, Department of Aerospace Engineering, University of Bristol (2007-2009). 

Dr Maheri has a BSc in Mechanical Engineering from Shiraz University, a Masters in Mechanical Engineering-Energy Conversion from Amirkabir University of Technology and a PhD in Mechanical Engineering-Design and Simulation of Adaptive Aero-structures from UWE Bristol. 

Memberships and Affiliations

Internal Memberships
External Memberships

Research Council

  • International Council for Research and Innovation in Building and Construction 

 Editorial Board

  • International Journal of Computational Methods and Experimental Measurements 
  • Journal of Energy and Power Engineering 

 Gust Editor

  • Renewable Energy
  • Journal of Thermal Analysis and Calorimetry (2019)

Conference Chair

  • General Chair and Founder, 1st International Conference on Multidisciplinary Engineering Design and Optimisation, Belgrade, September 2016
  • Chair, 4th International Symposium on Environment Friendly Energies and Applications, Belgrade, September 2016
  • Publication Chair, 3rd International Conference on Control, Engineering & Information Technology, Tlemcen, May 2015
  • Publication Chair, 3rd International Symposium on Environment Friendly Energies and Applications, Paris, Nov 2014
  • Co-chair, 2nd International Symposium on Environment Friendly Energies and Applications, Newcastle upon Tyne, June 2012

 Research Proposal Review

  • EPSRC
  • Carnegie Trust for the Universities of Scotland
  • German Academic Exchange Service (DAAD)
  • Romanian National Research Council (CNCS)

 External Examination and Advisory

  • External Examiner, MSc Advanced Lightweight Structures and Impact, Cranfield University (2016-2018)
  • Academic External Adviser for MSc Renewable Energy and Power by Research, University of the West of England, Bristol (2015)
Research

Research Overview

Research Areas

  • Wind Energy
  • Hybrid Renewable Energy Systems
  • Energy Transition
  • Multidisciplinary Design & Multiobjective Optimisation under Uncertainties
  • Decision Support Systems 
  • Nature Inspired Design & Sustainability

Current Research

Past Research

  • Structural optimisation
  • Composite Materials Machining Using Mesh Free Methods
  • Design and Optimisation of Composite Structures 
  • Wind Turbine Adaptive and Smart Blades
  • High Fidelity Analysis of Composite Structures
  • Wind Turbine Aerodynamics

Collaborations

Collaborators in recent projects:
  • ANM Group (UK)
  • Alnarjes Ltd (Jordan)
  • Xi'an Jiaotong University (China)
  • University of Applied Sciences Emden/Leer (Germany)
  • HWWI (Germany)
  • Western Norway University of Applied Science
  • Aashraye ltd (UK)
  • Marine Scotland
  • Energy Valley (Netherlands)
  • Offshorenergy.dk (Denmark)
  • Maritime Cluster Funen (Denmark)
  • Samsoe Kommune (Denmark)
  • Virol (Netherlands)
  • Lauwershorst Group (Netherlands)
  • University of Limerick (Ireland)
  • University Mascareignes (Mauritius)
  • Energy Renewable UK 
  • University Valenciennes (France)
  • University of Belgrade (Serbia)

Supervision

Current PhD projects (Lead Supervisor):

  1. Improving Aircraft Efficiency by Investigating Lifting Surface Topology
  2. Electricity and Hydrogen Charging Stations Powered by Hybrid Renewable Energy
  3. Integrated System Analysis of Floating Wind Turbines
  4. Enhanced Structural Design for Floating Offshore Wind Turbines
  5. New and Optimised Cutting Methods for Decommissioning of Offshore Windfarm
  6. Multi-objective Optimisation of Hybrid Renewable Energy Systems for Hydrogen Production
  7. Wind Turbine Smart Blades Made of Functional Materials
  8. Decommissioning Decision Support System

Past PhD projects (Lead Supervisor):

  1. Smart Energy Management System for Hybrid Renewable Energy System Supplying Plannable Power for Industrial Applications, Completed 2021
  2. Hybrid Wind Energy Systems Tailored for End User Requirements, Completed 2019
  3. Aero-Structural Analysis and Design of Smart Blades Made of Functional Materials, Completed 2018
  4. Performance-Reliability Driven Design of Complex Systems, Completed 2016
  5. Usage Driven Design of Power Systems of Eco-Urban Electric Cars, Completed 2015
  6. Decision Support System for Design of Hybrid Renewable Energy Systems, Completed 2015
  7. Aeroelastic Analysis of Wind Turbine Smart Blades Utilising Multiple Control Surfaces, Completed 2014
  8. Nonlinear Predictive Energy Management Strategies for Standalone DC Microgrids, Completed 2014
  9. Wind Turbine Adaptive Blade Integrated Design and Analysis, Completed 2013
  10. Aerodynamic Design of Wind Turbine Blades Utilising Nonconventional Control Systems, Completed 2012

 Past PhD projects (Second Supervisor):

  1. Structural optimisation of highly flexible aircraft, completed 2020
  2. Development of a real-time abnormal combustion detection system, completed 2018
  3. Modelling of the Composite Materials Machining Using Mesh Free Methods, completed 2017
  4. Multi-Objective Optimization for Design of Nonlinear Steel Frames with Variable Bracings Topology, Using Evolutionary Algorithms, completed 2014
  5. Novel Methods for Fatigue Data Editing for Horizontal Axis Wind Turbine Blades, completed 2012

Funding and Grants

  • Innovate UK and ANM Group Limited Knowledge Transfer Partnership, 'Application of Business and Engineering research methodologies to establish ANM Renewable & Agri-Tech advisory service', £188k, 2022-2023, CoI
  • EU-InterReg, 'Eco-innovative concepts for the end of offshore wind energy farms lifecycle (DecomTools)', £240k, 2018-2023, PI
  • National Decommissioning Centre PhD Studentship 'A Decision Support System for Oil & Gas Decommissioning', £72k, 2019-2022, PI
  • Carnegie Trust PhD Scholarship, 'Wind Turbine Smart Blades Made of Functional Materials', 2019-2022, Principal Supervisor
  • Scottish Funding Council SPRe-Industrial Collaboration, 'Induced Ductile to Brittle Transition Impact Cut', £78k 2019-2023, PI
  • Collaborative Industrial Doctoral Project, Energy Renewable UK, 'Renewable Energy Systems Tailored for End User (REST4U)', £66k, 2015-2018,PI
  • International Academic Research Collaboration, Meliksah University, Turkey, 'Usage Driven Design of Power Systems of Eco-urban Electric Cars', £11.6 k, 2011-2014, PI
  • Collaborative Industrial Doctoral Project, Synchron technology, 'Distributed Adaptive Renewable Energy Systems (DARES)', £168k, 2010-2014, PI
  • EU-FP7 European Lifelong Learning Programme, 'Green ELLEiEC', £40k, 2009-2013, CoI 
  • Royal Aeronautical Society, 'Aeroelastic Composite Wings and Blades', £3k, 2005, PI

 

Teaching

Teaching Responsibilities

Course Coordinator for

  • Design Of Mechanical Elements
  • Energy Systems Integration
Publications

Page 6 of 12 Results 51 to 60 of 115

  • Reduction of tidal turbines hydrodynamic loads employing bend-twist adaptive blades

    Somoza, M. H., Macquart, T., Maheri, A.
    3rd International Symposium on Environmental Friendly Energies and Applications (EFEA). IEEE Press pp. 1-5, 5 pages.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • A critical evaluation of deterministic methods in size optimisation of reliable and cost effective standalone Hybrid renewable energy systems

    Maheri, A.
    Reliability Engineering & System Safety, vol. 130, pp. 159-174
    Contributions to Journals: Articles
  • Design of reinforced and unreinforced timber beams under uncertainties

    Corradi, M., Maheri, A., Osofero, A. I.
    The Twelfth International Conference on Computational Structures Technology. Naples, Italy.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • The Effect of Column Length and Size on the Maximum Achievable Load Carrying Capacity of Prestressed Stayed Columns

    Maheri, A., Osofero, A. I., Corradi, M.
    Proceedings of the Twelfth International Conference on Computational Structures Technology. Topping, B. H. V., Iványi, P. (eds.). [7] Stirlingshire: CIVIL-COMP.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Optimal design of wind turbine blades equipped with flaps

    Wiratama, I. K., Maheri, A.
    ARPN Journal of Engineering and Applied Sciences, vol. 9, no. 9, pp. 1511-1515
    Contributions to Journals: Articles
  • Multi-objective design optimisation of standalone hybrid wind-PV-diesel systems under uncertainties

    Maheri, A.
    Renewable Energy, vol. 66, pp. 650-661
    Contributions to Journals: Articles
  • Finite element model for vibration and buckling of functionally graded sandwich beams based on a refined shear deformation theory

    Vo, T. P., Thai, H., Nguyen, T., Maheri, A., Lee, J.
    Engineering Structures, vol. 64, pp. 12 - 22
    Contributions to Journals: Articles
  • Microtab dynamic modelling for wind turbine blade load rejection

    Macquart, T., Maheri, A., Busawon, K.
    Renewable Energy, vol. 64, pp. 144-152
    Contributions to Journals: Articles
  • Modelling and simulation of standalone solar power systems

    Dizqah, A. M., Maheri, A., Busawon, K., Kamjoo, A.
    International Journal of Computational Methods and Experimental Measurements, vol. 2, no. 1, pp. 107-125
    Contributions to Journals: Articles
  • Chance constrained programming using non-Gaussian joint distribution function in design of standalone hybrid renewable energy systems

    Kamjoo, A., Maheri, A., Putrus, G. A.
    Energy, vol. 66, pp. 677-688
    Contributions to Journals: Articles
Show 10 | 25 | 50 | 100 results per page

Refine

Chapters in Books, Reports and Conference Proceedings

Contributions to Conferences

Contributions to Journals

Non-textual Forms

Other Contributions