production
Skip to Content

EM3028: ENGINEERING MATERIALS (2020-2021)

Last modified: 05 Aug 2021 13:04


Course Overview

The course focuses, initially, on the major groups of solid materials – metals, ceramics, polymers, and provides an introduction to materials selection. Strengthening mechanisms in these systems and the relationship between microstructure and mechanical properties are highlighted. The main failure and degradation processes of materials in service, fracture, fatigue, creep and corrosion, are considered. The major welding and adhesive bonding processes are introduced, and structural integrity of welded joints is examined. Finally, the course gives a comprehensive introduction to composite materials and motivation for their use in current structural applications. Manufacturing of different types of composites is reviewed.

Course Details

Study Type Undergraduate Level 3
Session First Sub Session Credit Points 15 credits (7.5 ECTS credits)
Campus Aberdeen Sustained Study No
Co-ordinators
  • Mehmet Kartal

Qualification Prerequisites

  • Either Programme Level 3 or Programme Level 4

What courses & programmes must have been taken before this course?

What other courses must be taken with this course?

None.

What courses cannot be taken with this course?

Are there a limited number of places available?

No

Course Description

1.      Introduction to Materials Selection. Selection strategies; Translation, screening and documentation; Ranking using material indices. CES EduPack materials selector software.

2.      Deformation and Strengthening Mechanisms. Dislocations and materials classes, dislocation motion in metals; Strategies for strengthening metals and alloys, grain size reduction, solid-solutions strengthening (alloying), precipitation strengthening (age hardening), cold working (strain hardening); Heat treatment, recovery, recrystallization and grain growth; Deformation mechanisms for ceramic materials; Brittle crosslinked and network polymers, semicrystalline (plastic) polymers, elastomers.

3.    Failure and Degradation. Mechanical failure, ductile and brittle fracture behaviour in metals, ceramics and polymers; Crack propagation: linear-elastic fracture mechanics, strain energy release rate and fracture toughness, elastic-plastic fracture mechanics, crack opening displacement, design against crack growth; Impact fracture testing; Fatigue behaviour: S-N curves, endurance, cumulative damage, fatigue crack growth, Paris Law, improving fatigue life; Creep and viscoelastic behaviour: primary, secondary and tertiary creep, creep rupture testing, Larson-Miller parameter, Master Creep Curves, stress relaxation, viscoelasticity of plastics, isometric and isochronous curves; Corrosion of metals: forms of corrosion, electrochemical corrosion, Standard Hydrogen Electrode, standard emf Series, Nernst equation, corrosion rates, the galvanic Series, corrosion prevention.  

4.    Joining. Welding, brazing and soldering, fusion welding processes and parameters; heat-affected zone (HAZ) in welding, distortion and cracking in welds, structural integrity of welded joints; Adhesive bonding.

5.      Basic Concepts and Characteristics of Composite Materials. Advantages and limitations of composites; Applications of composites; Types and classification of composites; Composites as anisotropic materials; Constituent materials and their properties, overview of different types of reinforcements and matrices; Reinforcement-matrix interface. Manufacturing of fibrous composites: Polymer matrix composites, metal matrix composites, ceramic matrix composites.          

6.      Strength and Failure of Composites. Determination of stiffness properties of unidirectional fibre-reinforced composite material; Failure of unidirectional fibre-reinforced composite material under different types of loading; Damage mechanisms, damage accumulation; Prediction of strength.

Materials Selection in Design: Students will undertake a materials selection exercise using the CES EduPack materials selection software.


Details, including assessment, may be subject to change until 31 July 2022 for 1st half-session courses and 23 December 2022 for 2nd half-session courses.

Contact Teaching Time

Information on contact teaching time is available from the course guide.

Teaching Breakdown

  • 1 Science Laboratory during University weeks 9 - 10, 12 - 13, 15 - 16
  • 1 Tutorial during University weeks 9, 11, 13, 15, 17

More Information about Week Numbers


Details, including assessment, may be subject to change until 31 July 2022 for 1st half-session courses and 23 December 2022 for 2nd half-session courses.

Summative Assessments

lab report (10%)

2x timed online test (45% each)

Formative Assessment

There are no assessments for this course.

Course Learning Outcomes

Knowledge LevelThinking SkillOutcome
FactualRememberILO’s for this course are available in the course guide.

Compatibility Mode

We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.