production
Skip to Content

EG501A: CONCEPTUAL DESIGN OF JACKETS AND SUBSEA STRUCTURES (2017-2018)

Last modified: 27 Feb 2018 12:45


Course Overview

The aim of this course is to introduce the student to the issues to be considered when conceiving the design of offshore jacket structures. Key concepts covered include strength and fatigue design, environmental loading, foundation design and fabrication and installation

 

This course is delivered by Distance Learning, where the students will access the teaching content via the web. The course tutor will be contactable on the on-line forum, as well as via email.

Course Details

Study Type Postgraduate Level 5
Session First Sub Session Credit Points 15 credits (7.5 ECTS credits)
Campus Online Sustained Study No
Co-ordinators
  • Dr Paul Davidson

Qualification Prerequisites

None.

What courses & programmes must have been taken before this course?

  • Engineering (EG) (Studied)
  • Any Postgraduate Programme (Studied)

What other courses must be taken with this course?

None.

What courses cannot be taken with this course?

None.

Are there a limited number of places available?

No

Course Description

The course introduces the concepts involved in jacket design, and offers a range of design specifications and worked examples. Emphasis will be placed on the variety of loading conditions, during load out and lift, installation and in service. The guidance in the notes reflects the latest code guidance. Attention will be given to good detailing and clarity of presentation in the design calculations submitted by the students.

 

By the end of the course, students should have knowledge and understanding of:

 

•        Bracing patterns in jacket structures;

•        Approved code of practice for designing offshore jackets (ISO 19902, APIRP2A);

•        Wave theories and wave loading;

•        Seismic loads;

•        Temporary loads, such as load-out, transportation, lift, set-down;

•        Strength and fatigue of jacket structures;

•        Design of offshore piled foundations;

•        Design of tubular joints;

•        Design rules for tubular members ;

•        Design for launch or lift installation.

 

This course is delivered by Distance Learning, where the students will access the teaching content via the web. The course tutor will be contactable on the on-line forum.

Further Information & Notes

Available by distance learning only. For students studying for MSc Oil & Gas Structural Engineering


Contact Teaching Time

Information on contact teaching time is available from the course guide.

Teaching Breakdown

More Information about Week Numbers


Details, including assessments, may be subject to change until 31 August 2023 for 1st half-session courses and 22 December 2023 for 2nd half-session courses.

Summative Assessments

1st attempt: Four coursework assignments (each 25%).

Resit: The re-sit will comprise of re-doing the failed element/s (exam and/or coursework assessment/s) from the 1st attempt with a maximum CGS mark of D3. The marks for other elements (successfully passed) will be carried over. Resit mark of either RP or RF will be recorded.

 

Formative Assessment

Staged online quizzes .

Feedback

Interaction between the students and with the course tutor on the on-line forum provide key learning role on the course, students will also receive individual, written feedback on their coursework.

Course Learning Outcomes

None.

Compatibility Mode

We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.