production
Skip to Content

EG55P8: PROCESS DESIGN, LAYOUT & MATERIALS (2016-2017)

Last modified: 28 Jun 2018 10:27


Course Overview

Candidates will develop PIDs for major systems applying LOPA and including instrumentation. Inherently safe equipment layout principles for both onshore and offshore applications are addressed.  Layouts will be developed for example applications.

The safety critical systems are reviewed and discussed.

Corrosion mechanisms are addressed together with materials for construction properties.  Basic corrosion models are presented for a wide range of fluids.  The operational modes which present most demand on materials are reviewed.  Corrosion in erosive environments is addressed.  Effects of temperature deviations in fire & blowdown are illustrated and analysed.  Case studies are used to illustrate common issues.

Course Details

Study Type Postgraduate Level 5
Term Second Term Credit Points 15 credits (7.5 ECTS credits)
Campus Old Aberdeen Sustained Study No
Co-ordinators
  • Dr Euan Bain

Qualification Prerequisites

None.

What courses & programmes must have been taken before this course?

  • Any Postgraduate Programme (Studied)
  • Engineering (EG) (Studied)

What other courses must be taken with this course?

None.

What courses cannot be taken with this course?

None.

Are there a limited number of places available?

No

Course Description

andidates will develop PIDs for major systems applying LOPA and including instrumentation. Inherently safe equipment layout principles for both onshore and offshore applications are addressed.  Layouts will be developed for example applications.

The safety critical systems are reviewed and discussed.

Corrosion mechanisms are addressed together with materials for construction properties.  Basic corrosion models are presented for a wide range of fluids.  The operational modes which present most demand on materials are reviewed.  Corrosion in erosive environments is addressed.  Effects of temperature deviations in fire & blowdown are illustrated and analysed.  Case studies are used to illustrate common issues.

Further Information & Notes

Registered for MSc Process Safety, MSc Safety & Reliability Engineering for Oil and Gas or MSc Safety & Reliability Engineering 


Contact Teaching Time

Information on contact teaching time is available from the course guide.

Teaching Breakdown

More Information about Week Numbers


Details, including assessments, may be subject to change until 30 August 2024 for 1st term courses and 20 December 2024 for 2nd term courses.

Summative Assessments

1st Attempt: 3-hour written examination (80%); continuous assessment (20%)

Resit: The re-sit will comprise of re-doing the failed element/s (exam and/or coursework assessment/s) from the 1st attempt with a maximum CGS mark of D3. The marks for other elements (successfully passed) will be carried over. Resit mark of either RP or RF will be recorded.

Formative Assessment

There are no assessments for this course.

Feedback

Feedback is given in the form of discussion with course tutors in contact sessions and on VLE and return of continually assessed work.

Course Learning Outcomes

None.

Compatibility Mode

We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.