production
Skip to Content

EG501N: DESIGN OF CONNECTIONS (DISTANCE LEARNING) (2015-2016)

Last modified: 25 Mar 2016 11:37


Course Overview

The purpose of this course is to explain the behaviour of steelwork connections and how this is translated into a wide range of design tools.

The fundamental concept is one of force paths, and how this applies to a wide range of different types of connections  is the key feature of this course.

The course is assessed by three coursework assignments.  Although the first two are standard designs, the third assignment is for a very non-standard detail which requires fundamental thinking about connection behaviour, and about the practical constraints that need to be accommodated.

Course Details

Study Type Postgraduate Level 5
Session First Sub Session Credit Points 15 credits (7.5 ECTS credits)
Campus None. Sustained Study No
Co-ordinators
  • Dr Paul Davidson

Qualification Prerequisites

None.

What courses & programmes must have been taken before this course?

  • Engineering (EG) (Studied)
  • Any Postgraduate Programme (Studied)

What other courses must be taken with this course?

None.

What courses cannot be taken with this course?

None.

Are there a limited number of places available?

No

Course Description

The aim of this course is to develop an understanding of the behaviour of steelwork connections that will equip the designer to safely and economically design connections of standard and non-standard configuration.

The aim of this course is to develop an understanding of the behaviour of steelwork connections that will equip the designer to safely and economically design connections of standard and non-standard configuration.

This course is delivered by Distance Learning, where the students will access the teaching content via the web in 5 blocks at 3 week intervals.

The course tutor will have scheduled times of delivery on the on-line forum, as well as contact via email.

Further Information & Notes

Available by distance learning only. For students studying for MSc Oil & Gas Structural Engineering

Contact Teaching Time

Information on contact teaching time is available from the course guide.

Teaching Breakdown

More Information about Week Numbers


Details, including assessments, may be subject to change until 31 August 2023 for 1st half-session courses and 22 December 2023 for 2nd half-session courses.

Summative Assessments

1st attempt: 3 coursework assignments (25, 25% and 50%). The first two assignments will be of standard connection details, and will demonstrate that the student can use previous designs as a basis for a new design, but the third assignment will be of a very non-standard detail which will be to demonstrate the student’s ability to use fundamental understanding to create an original connection design, which is sound and economic.

Resit: The re-sit will comprise of re-doing the failed element/s (exam and/or coursework assessment/s) from the 1st attempt with a maximum CGS mark of D3. The marks for other elements (successfully passed) will be carried over. Resit mark of either RP or RF will be recorded.

Formative Assessment

There are no assessments for this course.

Feedback

The course is assessed by three pieces of coursework, which will be returned to students with feedback comments via MyAberdeen. 

Course Learning Outcomes

None.

Compatibility Mode

We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.