production
Skip to Content

EG1008: PRINCIPLES OF ELECTRONICS (2017-2018)

Last modified: 18 Jul 2017 10:12


Course Overview

The aim of the course is to introduce basic concepts of electrical & electronics within a context of general engineering. The topics covered are kept at an elementary level with the aim of providing the foundational material for subsequent courses at levels 1 and 2. The course adopts the philosophy of application oriented teaching. During each topic the students will be provided with examples of day-to-day devices. Topics covered include dc circuit analysis, electronic amplifiers, digital circuits, optoelectronics, and ac theory.

Course Details

Study Type Undergraduate Level 1
Session First Sub Session Credit Points 15 credits (7.5 ECTS credits)
Campus None. Sustained Study No
Co-ordinators
  • Dr Thangavel Thevar

Qualification Prerequisites

  • Either Programme Level 1 or Programme Level 2

What courses & programmes must have been taken before this course?

  • Engineering (EG)
  • Any Undergraduate Programme (Studied)

What other courses must be taken with this course?

None.

What courses cannot be taken with this course?

None.

Are there a limited number of places available?

No

Course Description

1.     Atomic Theory: The Bohr atom, electrons, protons and neutrons; atomic number, Avogadro’s number; ions, electrons and movement of charge. Quantify electric charge and its relationship with electric current; Flashlamps.

2.     Basic Electrical Theory: Energy of an electron and voltage, resistance, and power, e.m.f. and potential difference. Ohm’s law and series and parallel resistors, resistivity and temperature coefficient of resistance. Conductors and insulators and lightning. Analysis and design of basic electric circuits; heating appliances such as toasters, kettles and electric blankets. SI units.

3.     Introduction to ac principles: ac waveforms, relationship between voltage, current, and power in resistive circuits, frequency and phase, RMS.

4.     Electromagnetic waves: Introduce electromagnetic spectrum – gamma rays to radio waves; wave propagation; wave modulation (FM & AM), communications, light and lasers.

5.     Basic Analogue Electronics: Diodes and rectifiers, zeners and stabilisers, transistors and simple amplifiers, photodiodes, LEDs and laser diodes. Operational amplifiers, inverting and non-inverting, summing and difference and comparators. LED/photodiode communication system.

 6.    Basic Digital Electronics: Introduction to logic circuits, AND, OR, NOR gates and truth tables.. . Boolean algebra. Examples of combinational logic. Algebraic simplifications. Numeric and alphabetic codes. Adder circuits. BCD to seven segment display.. D/A converter for control of optical display.

Degree Programmes for which this Course is Prescribed

  • BSc Engineering (Civil)
  • BSc Engineering (Electrical & Electronic)
  • BSc Engineering (General)
  • BSc Engineering (Mechanical)
  • Bachelor Of Engineering In Engineering Electronic & Software
  • Bachelor Of Science In Engineering (Chemical)
  • Bachelor Of Science In Engineering (Petroleum)
  • Bachelor of Engineering
  • Bachelor of Engineering in Chemical Engineering
  • Bachelor of Engineering in Eng (Civil and Environmental)
  • Bachelor of Engineering in Eng (Civil and Structural)
  • Bachelor of Engineering in Eng (Electrical and Electronic)
  • Bachelor of Engineering in Eng (Mech with Oil & Gas Studies)
  • Bachelor of Engineering in Eng (Mechanical and Electrical)
  • Bachelor of Engineering in Engineering (Civil)
  • Bachelor of Engineering in Engineering (Mechanical)
  • Bachelor of Engineering in Petroleum Engineering
  • Master Of Engineering In Elec & Electronic Eng W Renewabl En
  • Master Of Engineering In Electronic & Software Engineering
  • Master of Engineering
  • Master of Engineering in Chemical Engineering
  • Master of Engineering in Civil Eng with Subsea Technology
  • Master of Engineering in Civil Engineering
  • Master of Engineering in Civil Engineering with Management
  • Master of Engineering in Civil and Environmental Engineering
  • Master of Engineering in Civil and Structural Engineering
  • Master of Engineering in Electrical & Electronic Engineering
  • Master of Engineering in Mech Eng with Euro Studs
  • Master of Engineering in Mech Eng with Subsea Technology
  • Master of Engineering in Mechanical & Electrical Eng
  • Master of Engineering in Mechanical Eng with Management
  • Master of Engineering in Mechanical Engineering
  • Master of Engineering in Petroleum Engineering

Contact Teaching Time

48 hours

This is the total time spent in lectures, tutorials and other class teaching.

Teaching Breakdown


Assessment

1st Attempt: One written examination of two-hours duration (80%) and continuous assessment based on the 4 laboratory/design exercises (20%).

Resit: One written examination of three-hours duration (80%), with previous coursework marks used to make up the remaining (20%).

Formative Assessment

Students will have their log book and lab reports assessed on several occasions during the half session, and these will be returned to them with markers' comments. There will also be opportunities for informal formative assessment and feedback in the weekly tutorial sessions.

Feedback

a)     Students can receive feedback on their progress with the Course on request at the bi-weekly tutorial/feedback sessions or by making appointments to see the course coordinator.

 b)    Students requesting feedback on their exam performance should make an appointment with the course coordinator within 2 weeks of the publication of the exam results.

 c)     Students can obtain feedback on their understanding of key aspects of the course through self-administered MyAberdeen quizzes or through example questions during lectures.

Compatibility Mode

We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.