As climate change continues to cause major environmental concern around the world, the use of renewable energy increases. By using non-fossil fuel energy sources such as the sun, wind and water, emissions of greenhouse gases can be reduced. But the increasing numbers of windfarm developments have also created cause for public debate.
Whilst many people support the use of wind turbines, some groups have made cases for the negative environmental impacts these developments can have on the landscape, and on the levels of carbon emissions generated from the construction process. Windfarms on Scottish peatlands can cause particularly high levels of carbon release, but research from the University of Aberdeen has led to better understanding of these areas and provided a way for developers to determine the environmental credibility of a potential site.
Where does carbon come from?
Although windfarms are developed on various land types and in the sea, peatlands are becoming increasingly popular for developers looking to buy large, inexpensive areas of land that will still provide high energy returns. Peatlands aren’t considered valuable farming land, so this helps to reduce investment costs for developers. However, the soil contains large amounts of carbon which, when disturbed, can contribute to greenhouse gas emissions.
Just one hectare of peatland can contain 5,000 tonnes of carbon that starts to be released into the atmosphere when wind turbines are installed. The deeper the soil, the more carbon will be emitted during construction, which also rapidly decomposes the peat and creates large holes in the land. As the surrounding peat drains into the holes, the peatland dries out, and huge quantities of carbon dioxide are released.
A tool for carbon calculations
Following the Scottish Government’s 2017 pledge to generate fifty percent of the country’s energy consumption from renewable energy by 2030, Professor Jo Smith from the University’s School of Biological Sciences was commissioned by the Government to examine the impact of peatland windfarms on carbon emissions.
The research team developed a model for calculating how much carbon would be released into the atmosphere during a windfarm installation, based on several data inputs. This model then became the Windfarm Carbon Calculator: a web-based tool that now contributes to the planning process for all windfarm developments in Scotland that generate 50MW of electricity or more.
Professor Jo Smith said: “The purpose of the tool is to allow us to comprehensively and consistently assess the carbon impact of windfarm developments. By inputting a range of data including how many turbines will be in the development, the size and lifetime of the windfarm, how much backup energy will be required and if any improvements or restoration of the land will be taking place, the tool can tell us the carbon payback time for the windfarm.”
The ‘carbon payback time’ calculation determines how many years a wind turbine must be in operation before its negative environmental impact is counterbalanced by the positive impact of generating clean energy.
Reducing environmental effects
Professor Smith continues: “When wind turbines are installed, carbon is not only released from the peat, but also during all stages of the process and it’s important that we can understand how this process affects the amount of carbon dioxide being released into the atmosphere. Although land restoration can help to mitigate further carbon release, often the payback time is calculated to be longer than the lifetime of the windfarm. If this is the case, developers, planners and campaigners can use this data to determine if the windfarm installation should go ahead.”
By allowing planning authorities to quickly and easily check the carbon payback time of potential windfarms, the tool has enabled developers to avoid sensitive sites and instead consider areas where windfarm installations won’t cause harmful environmental impacts.
In collaboration with the wind industry, Scottish Natural Heritage and several environmental organisations, the tool is currently being developed further for use with current windfarms coming to the end of their lifecycle. Typically, a development’s lifespan is 20-25 years and so the adapted version of the tool may be able to play a key role in helping developers decide if a wind turbine should be recommissioned.
- The Windfarm Carbon Calculator is now a major part of the Scottish Government’s planning process for new windfarm developments on peatlands
- The tool guides the actions of the wind industry, ensuring planners understand the environmental credibility of a site and how best to reduce any potential carbon footprint
- Campaigners, politicians, community groups and the wider public can easily access the tool which offers a transparent methodology for potential developments and ensures benefits can be achieved
- Carbon calculations encourage developers to make the best decisions for the environment i.e. choosing shallow peatlands and restoring the land to its original condition to prevent drainage and excess carbon release
- Tool now used by the Scottish Environment Protection Agency (SEPA) to ensure environmental benefits will be seen from all new peatland developments
- Research reshaped public policy for development of Scottish windfarms by encouraging public debate, informing decisions for planning and providing guidance for changes to regulation