Last modified: 24 Jun 2020 14:31
Hydrocarbon fires and explosions produce extreme loading on engineering components. Structural steels lose their strength and stiffness well below the temperatures associated with hydrocarbon fires. Safety-critical elements must be designed to withstand both these temperatures and the blast overpressures that result from hydrocarbon explosions. Simple models are used to assess the loading that results from fires and explosions. Structural elements are analysed to illustrate the design procedures that are required to prevent escalation and to design against major accident scenarios.
|Session||First Sub Session||Credit Points||15 credits (7.5 ECTS credits)|
The following modules will be covered in the
1. Introduction to fire and explosion science
2.Hydrocarbon fire and explosions
3. Heat transfer
4. Fire dynamics
5. Material and structural performance in fire and high-rate loading
6. Fire resistant design of structures
7. Practical applications of fire and explosion engineering
8. An introduction to Fire and Explosion Hazard Management
9. Deflagration and detonation
10. The dynamic of deformation and failure of solids and structures
11. Estimation of explosion overpressures in air
Using MyAberdeen student will be able to view weekly lectures, access associated materials and undertake on line tutorials. There are formative assessments for duration of the course.
Information on contact teaching time is available from the course guide.
2x online open book exam (40% each)
There are no assessments for this course.
|Knowledge Level||Thinking Skill||Outcome|