Last modified: 22 May 2019 17:07
This course introduces the key concepts and components that form the subsea control system. A subsea control engineer must be comfortable in dealing with a multitude of engineering concepts at the basic level. Subsequently, this course borrows from concepts in mechanical engineering, electrical engineering, chemical engineering, environmental engineering, civil and structural engineering and hydraulics to name a few. The course tends to give a high-level systemic introduction of the various fundamental aspects necessary for a well-operating subsea control system.
|Session||First Sub Session||Credit Points||15 credits (7.5 ECTS credits)|
Topics covered in the course include (but are not limited to):
· Subsea control systems.
· Umbilical and control lines.
· Electrical Power management.
· Sizing of hydraulics.
For students taking MSc Subsea Engineering. EG50F6 is the code for the campus version of the course.
Information on contact teaching time is available from the course guide.
80% examination + 20% Continuous Assessment.
The re-sit will comprise of re-doing the failed element/s (exam and/or coursework assessment/s) from the 1st attempt with a maximum CGS mark of D3. The marks for other elements (successfully passed) will be carried over. Resit mark of either RP or RF will be recorded.)
Continuous assessment consists of two homework assignments, each accounting for 10% of the course.
We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.