Dr Alireza Maheri
Dr Alireza Maheri

Dr Alireza Maheri

PhD, CEng, MIMechE

Reader

About

Room 382, Fraser Noble Building

School of Engineering, King’s College

University of Aberdeen

Aberdeen, AB24 3UE

United Kingdom

Biography

Dr Maheri joined University of Aberdeen in 2016. Prior to that, he was a Senior Lecturer at the Department of Mechanical and Construction Engineering, Northumbria University (2009-2016) and a member of Aerospace Vehicle Architecture and Design Integration Research and Teaching Group, Department of Aerospace Engineering, University of Bristol (2007-2009). 

Dr Maheri has a BSc in Mechanical Engineering from Shiraz University, a Masters in Mechanical Engineering-Energy Conversion from Amirkabir University of Technology and a PhD in Mechanical Engineering-Design and Simulation of Adaptive Aero-structures from UWE Bristol. 

Memberships and Affiliations

Internal Memberships
External Memberships

Research Council

  • International Council for Research and Innovation in Building and Construction 

 Editorial Board

  • International Journal of Computational Methods and Experimental Measurements 
  • Journal of Energy and Power Engineering 

 Gust Editor

  • Renewable Energy
  • Journal of Thermal Analysis and Calorimetry (2019)

Conference Chair

  • General Chair and Founder, 1st International Conference on Multidisciplinary Engineering Design and Optimisation, Belgrade, September 2016
  • Chair, 4th International Symposium on Environment Friendly Energies and Applications, Belgrade, September 2016
  • Publication Chair, 3rd International Conference on Control, Engineering & Information Technology, Tlemcen, May 2015
  • Publication Chair, 3rd International Symposium on Environment Friendly Energies and Applications, Paris, Nov 2014
  • Co-chair, 2nd International Symposium on Environment Friendly Energies and Applications, Newcastle upon Tyne, June 2012

 Research Proposal Review

  • EPSRC
  • Carnegie Trust for the Universities of Scotland
  • German Academic Exchange Service (DAAD)
  • Romanian National Research Council (CNCS)

 External Examination and Advisory

  • External Examiner, MSc Advanced Lightweight Structures and Impact, Cranfield University (2016-2018)
  • Academic External Adviser for MSc Renewable Energy and Power by Research, University of the West of England, Bristol (2015)
Research

Research Overview

Research Areas

  • Wind Energy
  • Hybrid Renewable Energy Systems
  • Energy Transition
  • Multidisciplinary Design & Multiobjective Optimisation under Uncertainties
  • Decision Support Systems 
  • Nature Inspired Design & Sustainability

Current Research

Past Research

  • Structural optimisation
  • Composite Materials Machining Using Mesh Free Methods
  • Design and Optimisation of Composite Structures 
  • Wind Turbine Adaptive and Smart Blades
  • High Fidelity Analysis of Composite Structures
  • Wind Turbine Aerodynamics

Collaborations

Collaborators in recent projects:
  • ANM Group (UK)
  • Alnarjes Ltd (Jordan)
  • Xi'an Jiaotong University (China)
  • University of Applied Sciences Emden/Leer (Germany)
  • HWWI (Germany)
  • Western Norway University of Applied Science
  • Aashraye ltd (UK)
  • Marine Scotland
  • Energy Valley (Netherlands)
  • Offshorenergy.dk (Denmark)
  • Maritime Cluster Funen (Denmark)
  • Samsoe Kommune (Denmark)
  • Virol (Netherlands)
  • Lauwershorst Group (Netherlands)
  • University of Limerick (Ireland)
  • University Mascareignes (Mauritius)
  • Energy Renewable UK 
  • University Valenciennes (France)
  • University of Belgrade (Serbia)

Supervision

Current PhD projects (Lead Supervisor):

  1. Improving Aircraft Efficiency by Investigating Lifting Surface Topology
  2. Electricity and Hydrogen Charging Stations Powered by Hybrid Renewable Energy
  3. New and Optimised Cutting Methods for Decommissioning of Offshore Windfarm
  4. Multi-objective Optimisation of Hybrid Renewable Energy Systems for Hydrogen Production
  5. Wind Turbine Smart Blades Made of Functional Materials
  6. Decommissioning Decision Support System

Past PhD projects (Lead Supervisor):

  1. Smart Energy Management System for Hybrid Renewable Energy System Supplying Plannable Power for Industrial Applications, Completed 2021
  2. Hybrid Wind Energy Systems Tailored for End User Requirements, Completed 2019
  3. Aero-Structural Analysis and Design of Smart Blades Made of Functional Materials, Completed 2018
  4. Performance-Reliability Driven Design of Complex Systems, Completed 2016
  5. Usage Driven Design of Power Systems of Eco-Urban Electric Cars, Completed 2015
  6. Decision Support System for Design of Hybrid Renewable Energy Systems, Completed 2015
  7. Aeroelastic Analysis of Wind Turbine Smart Blades Utilising Multiple Control Surfaces, Completed 2014
  8. Nonlinear Predictive Energy Management Strategies for Standalone DC Microgrids, Completed 2014
  9. Wind Turbine Adaptive Blade Integrated Design and Analysis, Completed 2013
  10. Aerodynamic Design of Wind Turbine Blades Utilising Nonconventional Control Systems, Completed 2012

Funding and Grants

  • Innovate UK and ANM Group Limited Knowledge Transfer Partnership, 'Application of Business and Engineering research methodologies to establish ANM Renewable & Agri-Tech advisory service', £188k, 2022-2023, CoI
  • EU-InterReg, 'Eco-innovative concepts for the end of offshore wind energy farms lifecycle (DecomTools)', £240k, 2018-2023, PI
  • National Decommissioning Centre PhD Studentship 'A Decision Support System for Oil & Gas Decommissioning', £72k, 2019-2022, PI
  • Carnegie Trust PhD Scholarship, 'Wind Turbine Smart Blades Made of Functional Materials', 2019-2022, Principal Supervisor
  • Scottish Funding Council SPRe-Industrial Collaboration, 'Induced Ductile to Brittle Transition Impact Cut', £78k 2019-2023, PI
  • Collaborative Industrial Doctoral Project, Energy Renewable UK, 'Renewable Energy Systems Tailored for End User (REST4U)', £66k, 2015-2018,PI
  • International Academic Research Collaboration, Meliksah University, Turkey, 'Usage Driven Design of Power Systems of Eco-urban Electric Cars', £11.6 k, 2011-2014, PI
  • Collaborative Industrial Doctoral Project, Synchron technology, 'Distributed Adaptive Renewable Energy Systems (DARES)', £168k, 2010-2014, PI
  • EU-FP7 European Lifelong Learning Programme, 'Green ELLEiEC', £40k, 2009-2013, CoI 
  • Royal Aeronautical Society, 'Aeroelastic Composite Wings and Blades', £3k, 2005, PI

 

Teaching

Teaching Responsibilities

Course Coordinator for

  • Design Of Mechanical Elements
  • Energy Systems Integration
Publications

Page 4 of 5 Results 76 to 100 of 119

  • A finite element suite for deformation analysis of composite aeroelastic structures subjected to operational aerodynamic loading

    Maheri, A.
    Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, vol. 226, no. C8, pp. 2062-2076
    Contributions to Journals: Articles
  • A robust method for integrated design of trusses supporting distributed loads

    Maheri, A., Maheri, M. R.
    Engineering Structures, vol. 40, pp. 339-349
    Contributions to Journals: Articles
  • Design of a single-DOF kinematic chain using hybrid GA-pattern search and sequential GA

    Maheri, A., Isikveren, A. T.
    Proceedings of the Institution of Mechanical Engineers - Part C: Journal of Mechanical Engineering Science, vol. 226, no. C6, pp. 1633-1643
    Contributions to Journals: Articles
  • A comparative study of the performance of DC permanent magnet and AC induction motors in urban electric cars

    Sedef, K., Maheri, A., Daadbin, A., Yilmaz, M.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • An analytical model for deformation analysis of wind turbine adaptive blades

    Zhang, H., Maheri, A., Daadbin, A., Hackney, P.
    High Performance Structures and Materials VI. de Wilde, W., Brebbia, C., Hernandez, S. (eds.). WIT Press, pp. 13-25, 13 pages
    Chapters in Books, Reports and Conference Proceedings: Chapters
  • An analytical model for frequency analysis of composite wind turbine adaptive blades

    Zhang, H., Daadbin, A., Maheri, A., Hackney, P.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • An analytical model for frequency analysis of composite wind turbine blades

    Zhang, H., Maheri, A., Daadbin, A., Hackney, P.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • An assessment of solar irradiance stochastic model for the UK

    Dizqah, A. M., Maheri, A., Busawon, K.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • An assessment of wind speed stochastic model for the UK

    Dizqah, A. M., Maheri, A., Busawon, K.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Deterministic versus nondeterministic design of hybrid renewable energy systems

    Maheri, A., Bagali, R., Chilak, C., Scheller, F., Mustafa, A. I.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Effect of laminate configuration and shell-thickness variation on the inducted twist distribution in wind turbine adaptive blades

    Maheri, A., Zhang, H., Daadbin, A., Hackney, P.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Improvement of the accuracy of the blade element momentum theory method in wind turbine aerodynamics analysis

    Macquart, T., Maheri, A., Busawon, K.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Integrated flight control system development using CEASIOM

    Beaverstocka, C., Richardson, T., Maheri, A., Isikveren, A.
    Canadian Aeronautics and Space Journal, vol. 58, no. 1, pp. 29-46
    Contributions to Journals: Articles
  • Multi-Objective Optimisation of Hybrid Wind Turbine - PV Systems

    Kamjoo, A., Maheri, A., Putrus, G., Dizqah, A. M.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Optimal sizing of grid-connected hybrid wind-PV systems with battery bank storage

    Kamjoo, A., Maheri, A., Putrus, G., Dizqah, A.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Optimisation of grid-connected hybrid wind-PV-systems with battery bank storage

    Kamjoo, A., Maheri, A., Putrus, G. A.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Optimisation of the efficiency of carbon fibre heating elements implanted in wind turbine blades

    Smith, B. A., Maheri, A.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Phenotype building blocks and geometric crossover in structural optimisation

    Maheri, A., Macquart, T., Safari, D., Maheri, M. R.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Reliability criteria in optimal sizing of stand-alone hybrid wind-PV-battery bank system

    Kamjoo, A., Maheri, A., Putrus, G. A.
    Chapters in Books, Reports and Conference Proceedings: Conference Proceedings
  • Optimum design of steel frames using a multiple-deme GA with improved reproduction operators

    Safari, D., Maheri, M. R., Maheri, A.
    Journal of Constructional Steel Research, vol. 67, no. 8, pp. 1232-1243
    Contributions to Journals: Articles
  • An investigation into the potential use of microtabs in enhancing energy capture capability of wind turbines

    Wiratama, I. K., Maheri, A.
    Contributions to Conferences: Papers
  • Analysis of the Boeing 747-100 using CEASIOM

    Richardson, T., Beaverstocka, C., Isikveren, A., Maheri, A., Badcockb, K., Da Ronchb, A.
    Progress in Aerospace Sciences, vol. 47, no. 8, pp. 660–673
    Contributions to Journals: Articles
  • Improving the Durability of Straw-Reinforced Clay Plaster Cladding for Earthen Buildings

    Maheri, M. R., Maheri, A., Pourfallah, S., Azarm, R., Hadjipour, A.
    International journal of architectural heritage, vol. 5, no. 3, pp. 349-366
    Contributions to Journals: Articles
  • Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets

    Niroomandi, A., Maheri, A., Maheri, M. R., Mahini, S. S.
    Engineering Structures, vol. 32, no. 8, pp. 2326-2336
    Contributions to Journals: Articles
  • Complete flight control system integration and optimisation from a conceptual design phase

    Beaverstocka, C., Richardson, T., Isikveren, A., Maheri, A.
    Contributions to Conferences: Papers
Show 10 | 25 | 50 | 100 results per page

Refine

Chapters in Books, Reports and Conference Proceedings

Contributions to Conferences

Contributions to Journals

Non-textual Forms

Other Contributions