Last modified: 25 Mar 2016 11:39
The course begins with a treatment of the main items of plant and equipment, how they are designed and operated with a focus on process safety (failure modes, safe operating envelopes etc.).
Transient modes of operation are discussed and the interface of automatic process control and process safety is introduced.
The safety issues encountered in transient operations will be addressed; these include commissioning, start-up, shut-down, preparation for maintenance.
Relief and blowdown system design is developed.
Maintaining safe operations will cover the requirement for operational risk assessments, inspection and verification plans together with the development of operating and maintenance strategies.
| Study Type | Both Undergraduate & Postgraduate | Level | 5 |
|---|---|---|---|
| Session | Second Sub Session | Credit Points | 15 credits (7.5 ECTS credits) |
| Campus | Old Aberdeen | Sustained Study | No |
| Co-ordinators |
|
||
The course begins with a treatment of the main items of plant and equipment, how they are designed and operated with a focus on process safety (failure modes, safe operating envelopes etc.).
Transient modes of operation are discussed and the interface of automatic process control and process safety is introduced.
The safety issues encountered in transient operations will be addressed; these include commissioning, start-up, shut-down, preparation for maintenance.
Relief and blowdown system design is developed.
Maintaining safe operations will cover the requirement for operational risk assessments, inspection and verification plans together with the development of operating and maintenance strategies.
(EX402A Process Safety or EG402A Process Safety) AND (EX40HC Process Control or EG40HC Process Control) must be taken before this course
OR
Registered for MSc Process Safety
Information on contact teaching time is available from the course guide.
1st Attempt: 3-hour written examination (80%); continuous assessment (20%)
Resit: 3-hour written examination (100%)
There are no assessments for this course.
Feedback is given in the form of discussion with course tutors in contact sessions and on VLE and return of continually assessed work.
We have detected that you are have compatibility mode enabled or are using an old version of Internet Explorer. You either need to switch off compatibility mode for this site or upgrade your browser.
